Course Content
The Designing Cisco Enterprise Networks (ENSLD) v1.1 course gives you the knowledge and skills you need to design an enterprise network. This course serves as a deep dive into enterprise network design and expands on the topics covered in the Implementing and Operating Cisco® Enterprise Network Core Technologies (ENCOR) v1.0 course.
This course also helps you prepare to take the 300-420 Designing Cisco Enterprise Networks (ENSLD) exam which is part of the CCNP® Enterprise and Cisco Certified Specialist - Enterprise Design certifications.
How you'll benefit This course will help you:
- Learn the skills, technologies, and best practices needed to design an enterprise network
- Deepen your understanding of enterprise design including advanced addressing and routing solutions, advanced enterprise campus networks, WAN, security services, network services, and software-defined access SDA
- Validate your knowledge and prepare to take the 300-420 Designing Cisco Enterprise Networks (ENSLD) exam
- Earn 40 CE credits toward recertification
What to expect in the exam The 300-420 ENSLD exam certifies your knowledge of enterprise design including advanced addressing and routing solutions, advanced enterprise campus networks, WAN, security services, network services, and SDA.
After you pass the 300-420 ENSLD exam:
- You earn the Cisco Certified Specialist - Enterprise Design certification
- You will have satisfied the concentration exam requirement for the new CCNP Enterprise certification. To complete your CCNP Enterprise certification, you must pass the 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam or its equivalent
Who should attend
- Network design engineers
- Network engineers
- System administrators
Certifications
This course is part of the following Certifications:
Prerequisites
The Knowledge and skills that students are expected to have before attending this course are:
- Understand network fundamentals
- Implement LANs
- Implement internet connectivity
The Cisco course offerings that contribute to the recommended skills and knowledge are:
Course Objectives
After taking this course, you should be able to:
- Design Enhanced Interior Gateway Routing Protocol (EIGRP) internal routing for the enterprise network
- Design Open Shortest Path First (OSPF) internal routing for the enterprise network
- Design Intermediate System to Intermediate System (IS-IS) internal routing for the enterprise network
- Design a network based on customer requirements
- Design Border Gateway Protocol (BGP) routing for the enterprise network
- Describe the different types and uses of Multiprotocol BGP (MP-BGP) address families
- Describe BGP load sharing
- Design a BGP network based on customer requirements
- Decide where the L2/L3 boundary will be in your Campus network and make design decisions
- Describe Layer 2 design considerations for Enterprise Campus networks
- Design a LAN network based on customer requirements
- Describe Layer 3 design considerations in an Enterprise Campus network
- Examine Cisco SD-Access fundamental concepts
- Describe Cisco SD-Access Fabric Design
- Design a Software-Defined Access (SD-Access) Campus Fabric based on customer requirements
- Design service provider-managed VPNs
- Design enterprise-managed VPNs
- Design a resilient WAN
- Design a resilient WAN network based on customer requirements
- Examine the Cisco SD-WAN architecture
- Describe Cisco SD-WAN deployment options
- Design Cisco SD-WAN redundancy
- Explain the basic principles of QoS
- Design Quality of Service (QoS) for the WAN
- Design QoS for enterprise network based on customer requirements
- Explain the basic principles of multicast
- Designing rendezvous point distribution solutions
- Describe high-level considerations when doing IP addressing design
- Create an IPv6 addressing plan
- Plan an IPv6 deployment in an existing enterprise IPv4 network
- Describe the challenges that you might encounter when transitioning to IPv6
- Design an IPv6 addressing plan based on customer requirements
- Describe Network APIs and protocols
- Describe Yet Another Next Generation (YANG), Network Configuration Protocol (NETCONF), and Representational State Transfer Configuration Protocol (RESTCONF)
Outline: Designing Cisco Enterprise Networks (ENSLD)
- Designing EIGRP Routing
- Designing OSPF Routing
- Designing IS-IS Routing
- Design Case Study Activity: Designing Enterprise Connectivity
- Designing BGP Routing and Redundancy
- Understanding BGP Address Families and Attributes
- Design Case Study Activity: Designing an Enterprise Network with BGP Internet Connectivity
- Designing the Enterprise Campus LAN
- Designing Layer 2 Campus
- Design Case Study Activity: Designing an Enterprise Campus LAN
- Designing Layer 3 Campus
- Discovering the Cisco SD-Access Architecture
- Exploring Cisco SD-Access Fabric Design
- Exploring Cisco SD-Access Site Design Strategy and Considerations
- Design Case Study Activity: Designing Cisco SD-Access in the Enterprise
- Designing Service Provider-Managed VPNs
- Designing Enterprise-Managed VPNs
- Designing WAN Resiliency
- Design Case Study Activity: Designing Resilient Enterprise WAN
- Examining Cisco SD-WAN Architectures
- Examining Cisco SD-WAN Deployment Design Considerations
- Designing Cisco SD-WAN Routing and High Availability
- Design Case Study Activity: Designing Resilient Enterprise Cisco SD-WAN
- Understanding QoS
- Designing LAN and WAN QoS
- Design Case Study Activity: Designing QoS in an Enterprise Network
- Exploring Multicast with Protocol-Independent Multicast-Sparse Mode (PIM-SM)
- Designing Rendezvous Point Distribution Solutions
- Designing an IPv4 Address Plan
- Exploring IPv6
- Deploying IPv6
- Design Case Study Activity: Designing an Enterprise IPv6 Network
- Introducing Network APIs and Protocols
- Exploring YANG, NETCONF, RESTCONF, and Model-Driven Telemetry
