Implementing and Configuring Meraki MX, MS, MR, MV, MT Technologies (ICMT) - Lab Topology
Lab Topology
LAB OUTLINE
Lab 1: Configuring the Organization
- Configure Organizational Settings
- Add All Devices to Organization
- Create Networks
- Manage Network-Wide Settings
- Create Group Policies
- Manage Firmware Upgrades
- Create Templates
- Manage VLAN Templates
- Bind Templates to Networks
Lab 2: Configuring MX Appliances and Z3 Teleworker Devices
- Configure MX Appliance and Configure Z3 Appliance
- Setup VLANs and Layer 3 Interfaces
- Setup a VPN Concentrator
- Setup and Manage DHCP Settings
- Configure Layer 3 Firewall Settings
- Configure Layer 7 Firewall Settings
- Configure Content Filtering
- Configure Traffic Shaping
- Configure SDWAN Feature and traffic Distribution
- Configure Site-to-site VPN
- Configure Client VPN
- Integrate Active Directory with Group Policy Settings
- Create Traffic Shaping Policies
- Configure Access control with Radius and ISE
- Create and Configure Splash Pages
- MX Appliances and Z3 Verification and Troubleshooting
- Verify and Trouble Shoot Appliance Status
- Verify and Trouble Shoot Site to Site VPN
- Verify and Trouble Shoot Firewall Settings
- Check the Routing Table
- Use the Tools
- Trouble shooting with Packet Capture
Lab 3: Configuring MS Switches
- Switch Configuration
- Configure Basic Switch Settings
- Configure Switch Stack
- Configure Spanning Tree
- Create Layer 3 Interfaces
- Configure DHCP server
- Create a Static Route
- Configure OSPF Routing
- Configure ACLs
- Create Access Policies
- Configuring Packet Captures
- Configure Port Policies
- Configure Switch Using a Network Template
- Configure Spanning Tree
- Create Layer 3 Interfaces
- Create a Static Route
- Configure OSPF Routing
- Configure ACLs
- Create Access Policies
- Configuring Ports
- Configure Trunk Ports
- Configure Access Ports
- Set VLAN on Multiple Ports
- Configure Link Aggregation
- Configure Port Schedules
- Configure Port Mirroring
- Meraki Switch Monitoring
- Monitoring Switch Status
- Monitoring Switch Port Status
- Monitoring Real-time and Historical Data
- Monitoring DHCP on the Switch
- Monitoring Power
- Monitoring DHCP and Routing
- Monitoring Event Logs
- Summary Reports
- Troubleshooting Tools
- Turn on Switch Blinking for Switch Identification
- Performing Packet Captures
- Performing Cable Tests
- Performing Port Reset
- Performing Throughput Tests
- Performing device Reboots
- Using ARP and Route Tables for Troubleshooting
- Troubleshoot using Ping and Traceroutes
- Managing Firmware Upgrades
Lab 4: Meraki MR Wireless
- Configuring Meraki APs
- Connecting APs to the Network
- Configuring Basic information including Tags
- Configuring SSIDs
- Provisioning SSIDs
- Open with Splash Pages
- Click-Through
- Systems Manager Sign-in
- Facebook Sign-in
- Google Sign-in
- SMS Authenticated
- Billing Configuration for SSIDs
- Using Preshared Keys with WPA2
- Using WPA2-Enterprise SSIDs with 802.1X
- Cisco ISE
- MAC-based Access Control Filtered SSIDs
- Firewall & Traffic Shaping Configuration for Wireless
- Block local network for Guests
- Layer 3 Firewall Rules
- Block Applications
- Traffic Shaping Rules per SSID
- Configuring Layer 3 Roaming
- Configuring ISE Integration with Access Policies
- Configuring Access Policies for Wireless
- Configuring Wireless RF Radio Settings
- Auto RF
- Transmit Power Control
- Channel Selection
- Band Steering
- Client Balancing
- Configuring Bluetooth for Analytics
- Guest Self-Registration
- Configuring Splash Pages
- Configuring Floor Plans
- Placing APs on the Floor Plans
- Configuring RF Channel and Power Settings
- Configure Air Marshall to Isolate Rogue APs and Clients
- Monitoring Meraki APs
- Monitoring AP Status
- Using Meraki Wireless Health
- Monitoring Clients
- Monitoring RF Metrics
- Monitoring the RF Spectrum
- Monitoring SSID Availability
- Troubleshooting
- Using Heatmaps to Troubleshoot RF Issues
- Identify Problematic Areas
- Signal Attenuation
- Ping and Traceroute
- Reboot Device
- Blink LEDs
- Throughput
- Checking PCI Compliance
- Using the Event Log for Troubleshooting
Lab 5: Meraki MV Cameras
- Adding Cameras to a dedicated Network
- Connecting APs to the Network
- Configuring Basic information including Tags
- Configuring Users
- Configure Admins
- Configuring Camera Settings
- Configuring Video Settings
- Configuring Camera Analytics
- Configuring MV NightMode
- Create Recording Schedule
- Motion Based Recording
- Configuring Camera Retention
- View Camera Events
- Cloud Proxy Viewing
- Direct Streaming
- Searching Video for Events
- Creating Configuring Video Wall Boards
- Troubleshooting Camera Connectivity
- Using the Event Log for Camera Events
- Configure Wall Boards
Lab 6: Meraki Insight and Wireless Health
- Using insight to diagnose Issues in the network
- Using Wireless Health to troubleshoot Client Issues