Installing and Configuring Cisco SUBE/Gateways (ICCC) - Lab Topology

LAB OUTLINE

Lab 0: Connect to Lab Lab 1: Verify Cisco Unified Communications Manager Initial Settings

• Explore the Lab Environment
• Initial Default Configuration and Perform Initial Configuration

Lab 2: Deploying Endpoints and Users Pod Mac Addresses for HQ Phone 1

• Configure CUCM
• Configure IP Phones

Lab 3: Connecting Enterprise Network to SIP Trunk Provider

• Configure SIP Trunk Security Profile
• Configure SIP Profile
• Configure SIP Trunk CUBE1
• Configure SIP Trunk CUBE2
• Configure Route Groups for Outbound Calling
• Configure a Route list for Outbound Calling
• Set up Long Distance Route Pattern
• Set up Local Route Pattern

Lab 4: Configure SIP Gateway for CUBE1

• Global CUBE Configuration
• Translation Rules and Profiles for CUBE
• CUBE Firewall Configuration
• CUBE Inbound LAN Dial-peer Configuration
• CUBE Outbound LAN Dial-peer Configuration for Publisher
• CUBE Outbound LAN Dial-peer Configuration for Subscriber
• CUBE Inbound WAN Dial-peer Configuration
• Configure SIP User Agent
• CUBE Outbound WAN Dial-peer for Long Distance Calls
• CUBE Outbound WAN Dial-peer for Local Calls
• CUBE Outbound WAN Dial-peer for International Calls

Lab 5: Configure SIP Gateway for CUBE2

• Global CUBE Configuration
• Translation Rules and Profiles for CUBE
• CUBE Firewall Configuration
• CUBE Inbound LAN Dial-peer Configuration
• CUBE Outbound LAN Dial-peer Configuration for Publisher
• CUBE Outbound LAN Dial-peer Configuration for Subscriber
• CUBE Inbound WAN Dial-peer Configuration
• Configure SIP User Agent
• CUBE Outbound WAN Dial-peer for Long Distance Calls
• CUBE Outbound WAN Dial-peer for Local Calls
• CUBE Outbound WAN Dial-peer for International Calls
• Verify and Test Cube Status

Lab 6: Configure SIP Normalization on both CUBE1 and CUBE 2

• SIP Normalization
• SIP Custom Non-Standard Header
• Troubleshooting SIP Profiles
• Remove SIP Profile

Lab 7: Configure Call Admission Control

• Configure CAC based on call spike to manage call arrival rate
• Configure CAC based on Max Connections
• Configure CAC based on different thresholds

Lab 8: Configurable SIP Error codes

• Configure Error code at the dial-peer level when total-calls are exceeded

Lab 9: Destination Dial-peer Group and Inbound SIP Profiles

• Create a new Route Pattern within your CUCM for the TAC Toll Free number

Lab 10: Multiple E164 Pattern matching under the same dial-peer

Lab 11: Destination Server Group

• Configure Destination Server Groups to deliver call legs to your respective CUCM

Lab 12: CUBE Redundancy

• Perform the Steps on Both Routers
• Configure interface tracking
• Configure Redundancy Group (RG)
• Configure the interfaces
• Challenge (optional)